How to Choose a Soap Saver for Shower, Sink or Gift

A soap saver looks like a small, simple thing, and it is. But there are a few real differences between one that works and one that just looks good on the sink. Use this guide to pick one that actually keeps your bar dry in your own bathroom, shower or kitchen.

Step 1: Decide where it will live

The place decides the requirements. A shower niche stays wetter than a bathroom sink. A kitchen sink catches dishwater. A guest bath may sit unused for days with a wet bar on it. Think about the wettest spot the bar will see, and choose something that handles standing water by letting it go.

Step 2: Look for drainage, not a bowl

The point of a soap saver is to get water away from the bar. A solid tray or a dish with a lip holds water, which is the opposite of what you want. Look for an open grid or slats where water can pass through and air can circulate underneath. If the design could hold a puddle, the bar will still sit in it.

Step 3: Check the material

A soap saver lives in constant water and soap film, so the material matters.

  • Metal racks can rust, stain grout and scratch acrylic shower pans.
  • Ceramic and glazed dishes can chip on tile and tend to hold water.
  • Suction-cup holders depend on a smooth wall and can let go.
  • Flexible bioplastic grids do not rust, do not chip, and can sit flat on a shelf or inside an existing dish.

The SoapLift® is made from a corn-based bioplastic. It is REACH compliant and contains no BPA or phthalates.

Step 4: Make sure it fits your dish and your bar

Most standard bars sit comfortably on a soap saver. The SoapLift® Whale, for example, is about 4 inches long and low enough to nest inside a typical holder. If your dish is smaller, the material can be trimmed with household scissors. If you use the saver directly on a shelf or counter, it needs a flat, level surface, since it sits rather than hangs.

Step 5: Choose a shape and color you will like

Once drainage and material are settled, pick for looks. Shape does not change how a SoapLift® works.

  • Beach house, boat or coastal bath: Whale, Mermaid, Sea Turtle, Fish or Lobster. See the coastal shapes.
  • Kids’ bathroom: Duck, Bear, Butterfly and others. See the kids’ shapes.
  • Holiday and guest baths: Snowflake in Crystal, Maple Leaf in Red, Skull and Crossbones in Black. See the holiday shapes.
  • Mudroom or dog-wash sink: the Dog Bone.

Colors vary by shape. Crystal is translucent and almost disappears against white tile, Sage Green blends with stone and plants, and Seaside Blue suits coastal rooms.

Step 6: Keep it easy to clean

A good saver cleans in seconds. Rinse it under water and squeeze it a few times, and do a rinse when the grid looks cloudy. Skip the dishwasher. If you have hard water and see mineral film, a quick vinegar rinse works.

Gift or home use?

A soap saver makes an easy gift. Pair one with a bar of handmade soap and you are done. If you are buying for several sinks, one per sink is the simplest way to start. Orders of five or more ship FedEx 2-Day for $10.95, and under five ship USPS for $6.95.

Frequently asked questions

Does a soap saver replace my soap dish?

No. A SoapLift® sits in or beside the dish you already have, or directly on a shower shelf or counter.

Will it fit a shower niche?

It needs a flat, level surface because it sits rather than hangs. A tile niche or shelf works well. It does not attach with suction cups.

Can I use it with shampoo bars?

Yes. Shampoo bars sitting on wet tile wear down quickly, and lifting them off the surface helps the same way it does for bath soap.

Not sure what you need? Read why bar soap turns to mush, see the FAQ, or call 800-886-4926 and we will help you choose.

Similar Posts